Cloud PM4 Uživatelský manuál stáhnout pdf (Strana 2)

Up to 32 PM Series microphones may be interconnected in a simple “daisy-chain” manner via the Digital Paging Interface, using standard CAT-5

cable and RJ45 connectors. Microphones may be located anywhere in the system, provided that the total cable length does not exceed 1 km.

The “last” microphone on the network may be connected to the host device (zoner, mixer, mixer-amplier, etc.) in two ways, depending

on its type. The upper diagram shows a host device equipped with the Digital Paging Interface; in this case, the connection may be made with

another ordinary CAT-5 cable.

The lower diagram shows connection to the host being made via the analogue interface, comprising the audio signal from the microphone itself,

and zone selection commands made by short-to-ground contacts. By using the PM’s simple analogue connection, a single unit can interface with

almost any host equipped for paging from Cloud or other manufacturer. Up to 31 further microphones can then expand the network using

CAT-5 cable.

System Example

OUT OUT

CAT-5CAT-5

CAT-5 CAT-5CAT-5

(with Digital Paging Interface)

OUT

CAT-5

IN IN

OUT

AUDIO OUT

ZONE ACCESS CONTROL

Mixer

OUT

MIC INPUT PAGING ACCESS

Mixer

+12V

Z1 Z2 Z3 Z4 Z5 Z6 Z7 Z8

GAIN (dB)

123

(with Analogue Paging Interface)

CDPM

GAIN (dB)

THRU

-10

+10

1 2 3 4

Žádné komentáře

Cloud PM4 Uživatelský manuál Strana 2